HAYMAN 2020-1010

2020 SEMI-ACOUSTIC
NECK & FINGERBOARD
The "SLENDERSLIM" neck incorporates a fingerboard made of ebonised maple, precision fretted by hand to ensure perfect string pitch at each position, and sealed with durable polyurathane to facilitate fast action. The action is set prior to leaving our factory to ensure ac c urate intonation, fast fingering with the minimum of effort. The neck is "Counter Adjustable", meaning the neck adjustment is two fold-forward and backward with controlled tension.
1. Tensions neck against string pull.
2. Counteracts any possible neck warpage or mis-alignments.

INSTRUCTIONS FOR NECK ADJUSTMENT
Remove both screws from the small plate, which is adjacent to the neck support plate. With the neck in an upright position, move the key (as supplied) from left to right. This angles the neck back to bring the strings closer to the fingerboard. When the key is moved in reverse the neck is angled forward.

SUPERFLUX PICK-UPS.
Each pick-up is specially wound to reproduce perfectly every single string vibration so that each note is crystal clear even in the fastest passages. Height adjustment of each pick-tip is by means of the 4 slotted screws which raise and lower the whole unit as required. Individual response of each string can be adjusted by raising or lowering the small set pole screws.

MICROTUNE BRIDGE & TAILPIECE COMBINED.
Individual string height can be acquired by means of the 2 Allen screws on each of the bridge saddles, which are pre-set before leaving our factory. For perfect intonation on the harmonics the slotted screws on the back of the bridge can be finely adjusted. Overall height adjustment must not be made by attempting to turn the serrated wheels at either side of the bridge. These wheels are only to be, used when a tremolo arm is fitted.

CONTROLS
This model has dual pick-ups each operated by separate volume and tone control. A 3-way selector switch enables separate use of fingerboard pick-up or treble pick-up. Alternatively they can be used in conjunction with each other.

HAYMAN BODY
The 2020 semi-acoustic body is manufactured from a mahogany base covered with matched rosewood or sycamore veneer. This also incorporates scaled in VIBRASONIC chamber to provide long sustain on all notes. Hand crafted purfling around body and 'F' holes complete this fine semi-acoustic model.

1010 3 pick-up

NECK & FINGERBOARD

The "SLENDERSLIM" neck incorporates a fingerboard made of selected maple, precision fretted by hand to ensure perfect string pitch at each position, and sealed with durable, polyurathane to facilitate fast action. The action is set prior to leaving our factory to ensure accurate intonation, fast fingering with the minimum of effort. The neck is "Counter Adjustable", meaning the neck adjustment is two fold - forward and backward - with controlled tension.
1. Tensions neck against string pull.
2. Counteracts any possible neck warpage or mis-alignments.

INSTRUCTIONS FOR NECK ADJUSTMENT
Remove both screws from the small plate, which is adjacent to the neck support plate. With the neck in an upright position, move the key (as supplied) from left to right. This angles the neck back to bring the strings closer to the fingerboard. When the key is moved in reverse, the neck is angled forward.

SUPERFLUX PICK-UPS.
Each pick-up is specially wound to reproduce perfectly every single string vibration so that each note is crystal clear even in the fastest passages. Height adjustment of each pick-up is by means of the 4 slotted screws which raise or lower the whole unit as required. Individual response of each string can be adjusted by raising or lowering the small set pole screws.

MICROTUNE BRIDGE & TAILPIECE COMBINED.
Individual string height can be acquired by means of the 2 x 6 Allen screws on each of the bridge saddles, which are pre-set before leaving our factory. For perfect intonation on the harmonics the slotted screws on the back of the bridge can be finely adjusted. Overall height adjustment must not be made by attempting to turn the serrated wheels at either side of the bridge. These wheels are only to be used when a tremolo arm is fitted.

CONTROLS
A 3-way selector switch enables separate use of fingerboard pick-up, centre pick-up, or end treble pick-up. Because of the wide spread coverage of each pick-up, it is not necessary for them to be used in conjunction with each other. One volume and one tone control provides changes as required, whichever pick-up is in use.

HAYMAN BODY
The body is of sycamore or obeche and sealed inside is an exclusive VIBRASONIC chamber to give long sustain on all notes. The thickness of the body is also designed to add to the sustaining properties of the instrument. A final finish is of durable polyurathane which is both heat resistant and hard wearing.

HAYMAN 4040-3030

HAYMAN 4040 BASS GUITAR
Superb hand crafted instrument providing superslick action with perfect intonation of bass tones.

NECK & FINGERBOARD
Long scale slim line neck with curved hard Maple fingerboard. Fitted with positive geared, heavy chromed, non-slip machine heads. The neck is detachable from the body and is fitted with internal counter adjustable truss rod. This enables the neck adjustment to be made forward or backwards with controlled tension. A hand carved ivory nut is fitted and the whole neck and fingerboard is coated with hard wearing clear polyurethane.

BODY
Manufactured from selected Obeche with cut outs on either side to enable the player to fully utilise the whole of the fingerboard right to the end fret. The body is finished with many coats of hard wearing clear polyurethane.

PICK-UPS
Four staggered double pole pick-ups of superflux design give complete all-round response. Double pole pieces ensure individual string output adjustment. Underneath the pick-ups are fitted four Alnico bar magnets positioned parallel to the line of the strings providing a magnetic loo necessary to ensure total response.

CONTROLS
Single volume control, single bass/treble tone control work in co-ordination with three way positive flick switch thus providing a choice of using either the fingerboard pick-up, tail piece pick-up or both together.

COMBINED BRIDGE AND TAIL PIECE
Tooled in clear acrylic perspex into which is fitted four individual fully adjustable high carbon steel bridge saddles. These provide complete harmonic adjustment with total control over the playing action. The whole is mounted on a solid steel base, and is covered by an easily removable tinted perspex combined bridge and tail piece cover.

3030 2 PICK-UP

NECK & FINGERBOARD
The "SLENDERSLIM" neck incorporates a fingerboard made of selected maple, precision fretted by band to ensure perfect string pitch at each position. and sealed with durable polyurathane to facilitate fast action. The action is set prior to leaving our factory to ensure accurate intonation, fast fingering with the minimum of effort. The neck is "Counter-Adjustable", meaning the neck adjustment is two fold - forward and backward - with controlled tension.
1. Tensions neck against string pull.
2. Counteracts any possible neck warpage or mis-alignments.
INSTRUCTIONS FOR NECK ADJUSTMENT
Remove both screws from the small plate, which is adjacent to the neck support plate.
With the neck in an upright move the key (as supplied) from left to right. This angles
the neck back to bring the strings closer to the fingerboard. When the key is moved in reverse, the neck is angled forward.

SUPERFLUX PICK-UPS.
Each pick-up is specially wound to reproduce perfectly every single string vibration so that each note is crystal clear even in the fastest passages. Height adjustment of each pick-up is by means of the 4 slotted screws which raise or lower the whole unit as required. Individual response of each string can be adjusted by raising or lowering the small set pole screws.

MICROTUNE BRIDGE & TAILPIECE COMBINED.
Individual string height can be acquired by means of the 2 x 6 Allen screws on each of the bridge saddles, which are pre-set before leaving our factory. For perfect intonation on the harmonics the slotted screws on the back of the bridge can be finely adjusted. Overall height adjustment must not be made by attempting to turn the serrated wheels at either side of the bridge. These wheels are only to be used when a tremolo arm is fitted.

CONTROLS
This model has dual pick-ups each operated by separate volume and tone control. A 3-way selector switch enables separate use of fingerboard pick-up or treble pick-up. Alternatively they can be used in conjunction with each other.

HAYMAN BODY
The body is of selected obeche, and sealed inside is an exclusive VIBRASONIC chamber to give long sustain on all notes. The thickness of the body is also designed to add to the sustaining properties of the instrument. A final finish is of durable polyurathane which is both heat resistant and hard wearing.